Bath Accessories Voss Brushed Gold 12" Designer Grab Bar YG5118BG
Crisp edges and uncomplicated style features give the Voss collection an ageless, yet fashion-forward, presence. Each silhouette brings a confident Transitional style to the bath.
Assembled Dimensions 18"
-Brushed gold pairs rich, warm tones with lush texturing for a timeless finish
-Supports up to 500 lbs.
-Complies with Americans with Disabilities Act (ADA) specifications
-18" bar length
-1.25" bar diameter
-Stainless steel construction for added durability
-Limited lifetime warranty
1. Please note that screws MUST be mounted into a wood stud for secure installation.
2. Decide whether you would like to position your grab bar horizontally, vertically or at an
angle, remembering that BOTH ends of the grab bar MUST be positioned over a wood
stud (unless using secure mount anchors).
3. For easier installation and mounting remove 3 set screws from each flange and
remove bar from SecureMount™ Flange.
4. Remove cover and re-assemble flange to bar by tightening 3 set screws.
5. Place grab bar and mark three mounting locations on each of the two grab bar flanges
with a pencil.
6. Drill 1/8" diameter pilot holes at each screw location. Make sure to drill into the stud.
7. Install 3 screws and washers each SecureMount™ flange and tighten until secure. If
desired, apply silicone caulk to the back of the SecureMount™ plate to guard against
8. After screws are installed each side, dis-assemble bar from SecureMount™ flange by
removing set screws.
9. Re-install covers.
10. Place bar over SecureMount™ flanges and tighten all set screws.
11. Snap on covers.
Showroom Jakarta : Perumahan Alam Sutera, Jl. Jalur Sutera No.23D, RT.002/RW.006, Panunggangan Tim., Kec. Pinang, Kota
Tangerang, Banten 15143
Showroom Surabaya : Jl. Raya Geluran No.28, Geluran, Kec. Taman, Kabupaten Sidoarjo, Jawa Timur 61257
Instagram : @bottegaartisan